Title:On-board Wireless Video Terminal

4G(TD-LTE)无线传感采集终端

About

V-Driver is the product of an on-board wireless video terminal that independent research and developped by CCOM. This product adopts embedded technology, wireless network technology, audio and video compression technology, etc.

Features

Simultaneous support 4G and Wi-Fi,support GPS; Voice intercom; multiple disk shock absorption technology;ultra low delay image; support wide voltage input; 


Application

Widely utilized in the fields of car;shipboard; mobile surveillance, command and management system. Especially widely used in sped off, bus, coach, taxi, fire engines, police patrol car,financial vans, emergency rescue vehicles, emergency command vehicle, patrolboat, dangerous goods transport vehicle environment, etc


  • Function
  • Interface
  • Parameters
  • Application

lProvide 4 way video input, one wayaudio input, one way compound video output.

lProvide one way RS -485 yuntai control, support most mainstream yuntai agreement.

lProvide 4 way alarminput, 2 way alarm output.

lSupport the TD-SCDMA, CDMA2000and WCDMA mode. And 2 Gnetwork, such as EDGE, CDMA.

lSupport the TD- LTE,FDD - LTE 4G networks.Support Wi-Fi wireless transmission.

lSupport the GPS globalsatellite positioning system and hard disk storage.

lSupport DC 6-36 vwide voltage power supply input.

lSupport 4 road cameraDC 12 v power supply output.

lSupport SD cardstorage and disk storage.

lSupport real-time video upload and FTP download and equipment configuration management.

lSupport videomanagement platform and management platform of GIS.

lSupport the clocksynchronization.

lSupport delay shutdownfunction.

lSupport GPS low speedalarm and over speed alarm, support regional police alarm

 Order information      

ModelDescription


V-Driver

Portable wireless video  terminals, / TDL: support public TDD LTE, TDL14: support private network  LTE/W: support 3 G  WCDMA/E: support 3 G  EVDO. / G: support functions of GPS positioning 


l3G /4G antenna interface: SMA standard interface. External 3g or 4g connected

lWIFI antenna interface: SMA standard interface. External WIFI connected 

lGPS antenna interface: SMA standard interface. External GPS connected 

lHard disk lock: used to open and lock the hard disk

lUSB interface: used for external mobile hard disk, a choice from the built-in hard disk

lThe power interface definition:

    One line:12 v power supply (red)

    Two lines: the ACC (white)

    Three lines: ground (GND) (black)

    Four lines: no

lFour road function interface (aviation) definition, see below:

    One line:12 v power supply (red)

    Two lines: ground (GND) (black)

    Three lines: audio signal (green)

    Four lines: video signal lines (yellow)

lLight is defined as follows:

    HD indicator: hard disk light, flashing when hard work normally

    ERR indicator: alarm lamp, light flashing when system is abnormal

    3G /4G indicator light: 3G / 4G network indicator light, flashing after dial successfully

    PWRS indicator: power supply indicator light,  flashing with electricity

    WIFI light: check the WIFI module work, WIFI lights flashing

    ACC indicator: the ignition signal lamp

    GPS indicator:flashing after GPRS successfully position fixed

    RUN indicator: equipment operation indicator light, flashing when the system is running and vice versa

lPhoenix terminal: alarm I/O, RS232 and RS485 slot

b10(A)

b9(B)

b8(TX)

b7(RX)

b6(A02-)

b5(A01-)                 

b4(A14)

b3(A13)

b2(A12)   

b1(A11)  

485A   

485B

RS232TX                 

RS232RX                 

Second road alarm connection output    

First road alarm connection output

Fourth road alarm connection input

Thrid road alarm connection input

Second road alarm connection input

First road alarm connection input

a10(G)

a9(G)

a8(G)

a7(G)

a6(A02+)

a5(A01+)

a4(G)

a3(G)

a2(G)

a1(G)

GND

GND

GND 

GND

Second road alarm output

First road alarm output

GND

GND

GND

GND

lPhoenix terminal

    One road alarm input consists of b1 and to GND

    Two roads alarm input consists of b2 and to GND

    Three roads alarm input consists of b3 and to GND

    Four roads alarm input consists of b4 and to GND

    First alarm output consists of b5 and a5s

    Second alarm input consists of b6 and a6

    RS - 232 serial port communication consists of b7 and b8, and need to choose a grounding in a7~ a10

    RS - 485 PTZ control consists of b9 and b10, and need to distinguish between positive and negative


Video parameters

lVideo compression: h.264

lOperating system:embedded Linux system

lVideo interface:provide four-way video input, video output 1 road, visual/audio output 1 road

lImage resolution: QCIFCIF/D1 / CIF / 2

lTransmission framerate: 1-30 FPS adjustable

lAdjustable rate: 64 k- 4 Mbps

Audio parameters

lAudio input audiointerface: provide 4 road, 1 road two-way voice interface

lAudio compression: g.726 / ADPCM

Wireless parameters

lTransfer: one card transmission

lInterface standards: built-in UIM (SIM)card slot

lNetwork protocol: TCP/IP SMTP RTSPRTP/RTCP UDP protocol

Other

lProvide 4 way alarminput, 2 way alarm output

lSupport RS485 yuntaicontrol, support for multiple yuntai agreement

lPower: <12W

Power Supply

lPower supply: widepressure 9 ~ 36 v

lPower supply current 1.5 A

Environment Requirement

lOperating temperature:- 10 ℃ ~ 55

lStorage temperature: -20 ℃ ~ 70

lOperation humidity: 5%~80% without condensation

lStorage humidity: 5%~90%without condensation

Size

lLength x width xheight = 235mm × 178mm× 50 mm

Optionalmodules

lTD-SCDMA2000, CDMA2000 WCDMA 3G module; TD- LTE, FDD - LTE 4Gmodule;WIFI module; GPS module


Website:收发器 光纤收发器 工业交换机 4G无线视频 光电转换器 SEO关键字:收发器,光纤收发器,工业交换机,4G无线视频,智慧城市,4G路由器,光电转换器,视频光端机
分享到: